Pylox Lazer is a quick-drying thermoplastic acrylic based paint, that can be used on a wide range of interior and exterior substrates. It is commonly used for DIY decors and makeovers, spot repairs, repainting and reconditioning purposes.
Features
• Quick dry
• Excellent colour uniformity
• Easy spray application
Technical Data
Drying Time : Touch Dry: 15 minutes
: Hard Dry: 1 hour
Drying time above is based on temperature 28 – 32 °C, humidity 70 – 80%
Recoating Time : minimum 1 hours
Recoating time above is based on temperature 28 – 32 °C, humidity 70 – 80%
*Important Note:
Drying Time and recoating time are strongly depending on environment ventilation, paint thickness, environment
temperature, environment humidity, number of coats applied. So drying time and recoating time provided is for guide only.
Dry Fil Thickness : 35-45 µm per coat
No. of Coats : 2 – 3 coats
Theoretical Coverage: 0.80 m2 per 400cc per coat (for dry film thickness of 40um)
Practical Coverage: 0.64 m2 per 400cc per coat (for dry film thickness of 40um)
(20% Loss Factor)
Volume Solid: 18 – 25%
Shelf Life: Up to 24 months in tight sealed container
Specific Gravity: 0.92 – 1.15 kg/L
Application Method
Spray : Shake can thoroughly for at least 30 seconds before used.
Hold container approximately 30 cm from object to be sprayed with opening in spray head
pointed towards object. Press level down with index finger, keeping can in motion from side to
side so that coating is deposited evenly. It is advisable to finish the whole can once start to use,
to avoid the block of dry paint in the valve after use.