- Tube camber line amplitude is not too large, otherwise it will directly bend line pipe.
- The utility model can be used for inserting the bent pipe spring and then bending, which can avoid the problem of bending damage line pipe.
- Usage method: Bend the spring into the wire tube to bend the place, slowly pull to the angle you want, and then take out the spring.
- Size diameter : 25mm(1inc) | 20mm(3/4in)
- Total length : 35cm
How To Use
- Mark where you want to create a bend on the copper pipe with suitable marker as guided
- Insert the spring bender over the copper pipe ensuring that it is the correct diameter for the pipe your bending
- Bring the pipe with the spring bender inserted up to your knee or suitable curved surface and grip the pipe on either end and slowly bend the pipe to the desired bend by pulling it toward you
- Remove the spring by pulling and rotation anti-clockwise
Item in the box
1 pcs x Spring Conduit Bender