Smart Epoxy Tile Topcoat Clear is a two-pack system of epoxy primer barrier coating designed for
use on ceramic tile & concrete floor surface which provide good adhesion to the substrate. It is suitable for use as tie coat between concrete substrate and colour flakes or to be use as tie coat
between concrete substrate and solvent based topcoat such as Smart Epoxy BE4 or BE5 Finish
Epoxy Tile Primer
2 Pack System (100% Solid, Solvent Free)
Excellent Adhesion
Save Time / Cost
No Hacking
Mixing Ratio : Part A : 0.74KG | Part B : 0.26KG
Coverage : 1KG (set) = +- 36-40 square feet
Available in White | Black | Brown | Dark Grey
Epoxy Tile Topcoat Clear
2 Pack System (100% Solid, Solvent Free)
Excellent Adhesion
Save Time / Cost
No Hacking
Anti-Fungus
Mixing Ratio : Part A : 0.74KG | Part B : 0.26KG
Coverage : 1KG (set) = +- 36-40 square feet
Available in Clear
Usage : Flooring / Wall
Properties
Finishing : Gloss finish
Theoretical Coverage : –
Recommended No. Of Coats : 1
Recommended Film Thickness Per Coat : 50µm
Theoretical Coverage At Recommended Film Thickness : 6.25m2/L
Practical Coverage (20% Loss Factor) : 5.0 m2 /litre (for dry film thickness of 50 microns)
Drying Time : –
Dry to touch: 2 hours
Dry to overcoat: 2 hours
Curing time: 6-7 days
Pot Life : 20 min after mixing
(100% solid, solvent free)
Mixing Ratio : Part A : 0.74kg + Part B : 0.26kg
Surface Preparation
Surfaces to be painted should be clean, dry and free from oil, grease and contaminants before
painting. For previously painted surfaces, remove all unstable paint film, dust and foreign matter.
Repair any surface defects, clean off and dry before using Smart Epoxy Tile Finish.
Recommeded no. of coats: 1 coat
Recommeded film thickness per coat: 50 microns for dry film; 165microns for wet film
Reviews
There are no reviews yet.